Negotiable
The date of payment from buyers deliver within days
Guangdong
Long-term effective
2020-11-02 17:59
145
Company Profile
Shenzhen Alean Security Equipment Co., LtdBy certification [File Integrity]
Contact:alaafsb(Mr.)
Email:
Telephone:
Phone:
Area:Guangdong
Address:Guangdong
Website:http://www.aleansecurity.com/ http://alaafsb.shqzjx.com/
4 Beam Active Infrared Detector
Products Introduction
ALEAN provides various options for Active Infrared Detector with weather proof shell and alternative frequency modulation function, generating timely alerts and comprehensive security for perimeter-protected areas.
Perimeter Protection is an external perimeter security system for detection of intruders outside – before they can do any damage. ALEAN provides a full range of products, including various options for beam number ,different frequencies selectable for long distance and stacking installation.
1.NC/NO relay outputs, compatible with other brand alarm systems like Honeywell,Bosch,Paradox,DSC,and GE etc.
2.Digital filter technology,well performance against direct sunlight,fluorescent and car light.
3.Adjustable interruption time (50/100/300/700msec optional).
4.LED display signal grade for easy alignment.
Product Parameter
Model |
ABH-50L | ABH-100L | ABH-150L | ABH-200L | ABH-250L |
|
Detection Range |
Outdoor |
50m |
100m |
150m |
200m |
250m |
Indoor | 150m | 300m | 450m | 600m | 750m |
|
Maximum Arrival Distance |
300m | 600m | 900m | 1200m | 1500m |
|
Detection Method |
Simultaneous interruption of 4 infrared beams or a group of 2 infrared beams |
|||||
Interruption Time |
50msec, 100msec,300msec,700msec (corresponding to 20,21,22,23) |
|||||
Beam frequency |
4 channel selectable (corresponding to 10,11,12,13) |
|||||
Power Supply |
DC12~24V; AC11~18V (12VDC recommendable) |
|||||
Current Consumption |
70mA max | 80mA max | 90mA max | 100mA max | 110mA max |
|
Alarm Period |
2sec (±1) |
|||||
Alarm Output |
1C. relay output (AC/DC30V, 0.5A max) |
|||||
Tamper Switch |
NC, opens when cover removed |
|||||
Operating Temperature |
-25℃ to +60℃ |
|||||
Environment Humidity |
95% max |
|||||
Alignment Angle |
Horizontal 180°(±90°), Vertical 20°(±10°) |
|||||
Mounting |
Wall or Pole |
|||||
Protection Degree |
IP65 |
|||||
Material |
PC engineering plastic |
|||||
Dimension (L*W*H) |
92*90*291mm |
|||||
Weight (Transmitter and Receiver) |
2200g |
|||||
Heaters |
Voltage |
12V |
||||
Current | 200mA max |
|||||
Temperature | +70℃ |
|||||
Note: When environment temperature lower than -20℃, please use heaters to ensure normal working. Heater is non-polarized. |
Product Feature And Application
Production Details
ALEAN 4 beam active infrared detector adopt high-precision aspheric lens, high conversion rate of light focusing, uniform and clear spot image formation; New design, good focusing effect, easy to alignment, long receiving and transmitting distance.High waterproof range is IP 65,effectively responds to bad weather such as wind, frost, snow, fog, tide and direct sunlight.According to the external environmental change,adjusted to its working state to minimize the false alarm rate caused by it. Advanced digital filtering technology,compared with traditional analog filtering,with more accuracy and greater stability.
Product Qualification
FAQ
1.Fault :The light is interrupted, receiver gives an alarm and the indicator light is off .
Analysis:
1.The reflection or other transmitter light enter the receiver
2. The two beams of light are not blocked at the same time
3. The shading time is too short
Solution:
1. Remove the reflective object or change the direction of the optical axis
2. Block 2 beams at the same time
3. Extend the shading time
2.Fault:Optical axis shows repeated voltage jumps
Analysis:
1. Poor grounding of switching power supply shell
2. The optical axis is not aligned
3. The signal is too weak
Solution:
1. Ground the shell
2. Adjust the optical axis
3. Replace the long-distance infrared detector
http://www.aleansecurity.com/